TREFORM™
Dalmex bittet die neue Generation von eingebetteten Metall – Estrich – Schienen für Beton - und Estrich-Boden an.
Dalmex bittet die neue Generation von eingebetteten Metall – Estrich – Schienen für Beton - und Estrich-Boden an.
-1-
Improved design
-2-
Reasonable price
-3-
The widest range of 14 TREFORM sizes
TREFORM™ ADVANTAGES
Made of 0,8mm steel - thinner and lighter that analogues
Easy to transport and easy to set quickly
Proper TREFORM set up is a guarantee for floor flatness
Ease for through reinforcement
TREFORM application it is a problem-free solution for joints.
Allows saving a slab bearing capacity at the junction of concreting section.
Real time and cost saving
Easy to transport and easy to set quickly
Proper TREFORM set up is a guarantee for floor flatness
Ease for through reinforcement
TREFORM application it is a problem-free solution for joints.
Allows saving a slab bearing capacity at the junction of concreting section.
Real time and cost saving
TREFORM is available with a plastic strip with two sizes: 8 mm and 18 mm high. TREFORM with a plastic strip of 18 mm is recommended for concrete slabs where concrete is the top (finish) coat
The holes in a top part of TREFORM T65 and the bigger sizes have an increased diameter of 31 mm (the diameter of the holes TREFORM T45/Т55 is 25mm)
TREFORM is available with a plastic strip with two sizes: 8 mm and 18 mm high. TREFORM with a plastic strip of 18 mm is recommended for concrete slabs where concrete is the top (finish) coat
The holes in a top part of TREFORM T65 and the bigger sizes have an increased diameter of 31 mm (the diameter of the holes TREFORM T45/Т55 is 25mm)
ABOUT TREFORM™
Traditional concrete flooring methods requires the use of removable formwork. There is a major risk that the joint formation area between the concreting section will be partially damaged when removing it before concreting the next section. Such joints are trouble spots and may require expensive maintenance and repair later on.
The solution to this problem is application of the leave-in-place screed rails TREFORM™
During installation of TREFORM to the required level, it is needed to fix the rails on the base with concrete markers. Therefore, it is necessary to lift the form above the base so that the concrete mixture could pass under it. It's important is to leave a suitable distance between the base and the bottom of the rail, with regard to the maximum size of aggregate in the concrete mix.
The solution to this problem is application of the leave-in-place screed rails TREFORM™
During installation of TREFORM to the required level, it is needed to fix the rails on the base with concrete markers. Therefore, it is necessary to lift the form above the base so that the concrete mixture could pass under it. It's important is to leave a suitable distance between the base and the bottom of the rail, with regard to the maximum size of aggregate in the concrete mix.
TREFORM™ TECHNICAL DATA
Processing by a poker vibrator provides penetration
of concrete mix into the inner part of TREFORM and
prevents air cavities
of concrete mix into the inner part of TREFORM and
prevents air cavities
Easy to cut directly on construction site
Treform and concrete form a monolithic structure
of high strength
of high strength
Download our current prices:
TREFORM™ GALLERY
ASK A QUESTION
CONTACTS
Office:
Metalo g. 2, LT-02190 Vilnius, Lithuania.
Tel. : +370 5 214 24 11
e-mail : info@dalmex.lt
Warehouse:
DIDNERIAI Ltd.
V.A.Graičiūno str. 38, LT-02241, Vilnius, Lithuania
Mob.: +370 6 144 0604
Office:
Metalo g. 2, LT-02190 Vilnius, Lithuania.
Tel. : +370 5 214 24 11
e-mail : info@dalmex.lt
Warehouse:
DIDNERIAI Ltd.
V.A.Graičiūno str. 38, LT-02241, Vilnius, Lithuania
Mob.: +370 6 144 0604
